Designed to be installed within a pitched roof ranging between 10° and 70° slope. If required this product can accommodate asymmetrical roof pitches and can also incorporate different rooflight slope lengths on either side.
Duplus Rooflights are available in a range of sizes and finishes to suit.
If you require other colours, sizes or quantities please get in touch or call 0116 2610 710.
Stock items are usually delivered within 1-2 days*
Custom rooflights are usually delivered within 3-4 weeks*(*subject to availability)
FREE DELIVERY (Excl. Scotland, West Wales, Devon & Cornwall)
Please note, all sizes are based on external kerb/upstand size
Our sleek and contemporary-styled fixed ridge rooflights are designed to be installed over the apex or ridge of a pitched roof. Our ridge rooflight is a variant of our highly popular fixed rooflight incorporating the same glass to glass structural silicone glazing techniques to ensure a complete, factory-finished, high-quality frameless product.
Fully watertight with high quality, flush glazed and elegant appearance. Our ridge rooflight incorporates fully enclosed double-glazed units to eliminate risk of breakage.
We deliver our ridge rooflights in two sections, one section for each side of the ridge. The frame and glass for each section is structurally bonded and assembled in the factory. Simple on-site assembly required to join only the two sections. Please refer to our technical downloads for details which can be found further down this page.
Designed to be installed within a pitch range of between 10° and 70°. If required this product can accommodate asymmetrical roof pitches and can also incorporate different rooflight slope lengths on either side.
Our ridged rooflight is easy to install. An integral perimeter gasket creates an air and water seal without the need for site-applied silicone. The product is secured via screw fixing to the builders kerb externally and a matching cover clip is then applied to conceal the fixings.
Duplus ridge rooflights are double-glazed in clear HEATSOAKED toughened safety glass as standard.
Options are available:
Material Specifications & U-Value
All our rooflights satisfy the thermal performance criteria defined in the Building Regulations and achieve a high resistance to condensation under normal conditions. We can provide True U-value and Ud-values upon request.
The Duplus rooflight range is tested for weathertightness to BS EN 14351-1:2006 +A1:2010 clauses 4.2, 4.5 and 4.14 – Our test reports are available in our technical section.
As standard, the extruded aluminium perimeter frame is powder-coated RAL 7016 dark grey matt or RAL 9005 black matt. We can offer other RAL colour options upon request.
Our glazing specifications incorporate clear low ‘E’ glass as standard, achieving a centre pane U-value of 1.1 W/m²K.
| Size | 1000mm Ridge x 500mm Slope, 1000mm Ridge x 1000mm Slope, 1500mm Ridge x 1000mm Slope, 1500mm Ridge x 1200mm Slope, 1500mm Ridge x 1500mm Slope |
|---|
Download this manual for a complete overview of your ridged rooflight.
Download this manual for more information on setting out your upstand for rooflight installation.
Download this technical drawing for guidance on the installation of your ridged rooflight.
Download this technical drawing for additional diagrams showing the details of the Ridged Rooflight.
Stock items are usually delivered within 1-2 days (*subject to availability). Rooflights in custom sizes have a lead time of 3-4 weeks and subject to workload at the time of ordering.
We provide free delivery for rooflights across most of mainland UK. Outside of this area you are welcome to pick your rooflight up from our factory or we can provide a courier.
If you have a non-standard size, custom requirements or not quite ready to order, why not send our product experts a quick message?
We’ll endeavour to answer your query quickly!
